Bộ kiểm tra đường truyền (Transmission Line Test set) HTXL-H

Bộ kiểm tra đường truyền (Transmission Line Test set) HTXL-H

Hãng sản xuất: Wuhan Huatian Electric
Xuất xứ: China
Bảo hành: 12 tháng

Thông số kỹ thuật: Bộ kiểm tra đường truyền (Transmission Line Test set) HTXL-H

Khoảng cách đo lớn nhất: 32km (100km for open wire )
Công suất tiêu thụ: 5VA
Nhiệt độ hoạt động: 0℃~+40℃Nhiệt độ lưu trữ: -10℃~+50℃Độ ẩm: 40℃(20~90)%RH
Áp xuất khí quyển:  (86~106)Kpa
Khối lượng:  2kg

HTXL-H Transmission Line Test Set

Introduction: HTXL-H Transmission Line Test Set

- Multi functional, safe, fast speed and accurate. It uses LV impulse method and HV flashover method to test, can test kinds of fault of the cable, especially can directly test the flashover and high resistance fault without burn through. If equipped with sound locator, accurately detect the position of the fault point.
- High precision, adopts high-speed sampling technique, A/D sampling speed is 100MHz, resolution is 1m, and detection blind area is 1m.
- High degree of intelligence, test results auto displayed by LCD.
- Can store and review the waveform and parameters, these information will not loss after power off.
- Dual display, compare the measured waveform and normal waveform of the fault cable, benefit to further detection of the fault.
- With function of wave form expansion ratio, change the proportion of the waveform, expand the waveform to test.
- Directly display the direct distance or relative distance between fault point and measured point. 
- Can modify the speed according different measured cable.
- Portable design, small in volume, with rechargeable battery, easy to carry and operate.

Features: HTXL-H Transmission Line Test Set

- Multi functional, safe, fast speed and accurate. It uses LV impulse method and HV flashover method to test, can test kinds of fault of the cable, especially can directly test the flashover and high resistance fault without burn through. If equipped with sound locator, accurately detect the position of the fault point.
- High precision, adopts high-speed sampling technique, A/D sampling speed is 100MHz, resolution is 1m, and detection blind area is 1m.
- High degree of intelligence, test results auto displayed by LCD.
- Can store and review the waveform and parameters, these information will not loss after power off.
- Dual display, compare the measured waveform and normal waveform of the fault cable, benefit to further detection of the fault.
- With function of wave form expansion ratio, change the proportion of the waveform, expand the waveform to test.
- Directly display the direct distance or relative distance between fault point and measured point. 
- Can modify the speed according different measured cable.
- Portable design, small in volume, with rechargeable battery, easy to carry and operate.

Specifications: HTXL-H Transmission Line Test Set

- Applications: This device can test all types power cable, local cable, FM communication cable, coaxial cable, and short circuit, earth, high resistance leakage, high resistance flashover fault of the metal overhead lines, and the broken & poor contact of the cable. It also can test the length of the cable and the speed of the electric wave on the cable.
- Longest measured distance: 32km (100km for open wire )
- Power consumption: 5VA
- Temperature: 0℃～＋40℃
- Extreme temperature: －10℃～＋50℃
- Relative humidity: 40℃(20～90)%RH
- Atmospheric pressure: (86～106)Kpa
- Weight: 2kg

ETCO.VN