Phụ tải điện tử lập trình DC Leaptronix mPD-501 (PROGRAMMABLE DC ELECTRONIC LOAD)

Phụ tải điện tử lập trình DC Leaptronix mPD-501 (PROGRAMMABLE DC ELECTRONIC LOAD)

Hãng sản xuất: Leaptronix
Xuất xứ: Đài loan
Model: mPD-501
Bảo hành: 12 tháng

Thông số kỹ thuật: Phụ tải điện tử lập trình DC Leaptronix mPD-501 (PROGRAMMABLE DC ELECTRONIC LOAD)

DC Electronic Load

Introduction: PROGRAMMABLE DC ELECTRONIC LOAD

mPD-501 DC electronic load mainly focuses on the testing of power circuit on PCB. mPD-501 offers a solution for function test of Switch step up, Stepdown, Regulators and Driver IC . Engineer puts components, such as CPU, DSP, FPGA; etc on a PCB after the power circuit has been tested. It's not complete to use a meter to measure the voltage. mPD-501 offers engineer OVP, OCP and OPP functions that help engineer know the value of overload current.

On the other hand, engineer can use a programmable DC power supply (mPP series) to offer external power and connect PCB's output to mPD-501. Then engineer can easily get output watt, figure out the efficiency of power circuit and check if inductances, capacitances and resistances perfectly work with the power circuit.

mPD-501 not only offers loading emulation of current but also provides OVP and OPP. User can use these functions to test solar power battery, rechargeable battery and motor driver. In school laboratory, mPD-501 helps students do experiment on power circuit, linear circuit and driver circuit.

Features: PROGRAMMABLE DC ELECTRONIC LOAD

Constant current (C.C) & constant voltage (C.V) emulation.
Display real time voltage, current and watt.
Both of C.C and C.V mode have 3 sets of memory
Over current protection (O.C.P), over voltage protection (O.V.P) and over power protection (O.P.P).

Specification: PROGRAMMABLE DC ELECTRONIC LOAD

Power: 50W*1
Current: 0~8A
Voltage: 40V

CC MODE: PROGRAMMABLE DC ELECTRONIC LOAD

Range: 0~8A
Resolution: 2mA
Accuracy: 0.1%+/-0.1%FC

CV MODE: PROGRAMMABLE DC ELECTRONIC LOAD

Range: 0~40V
Resolution: 10mV
Accuracy: 0.1%+/-0.1%FC

Voltage Read Back

Range: 0~40V
Resolution: 10mV

Current Read Back

Range: 0~8A
Resolution: 2mA

Power Read

Range: 0~50W*1
Resolution: 10mW

Modes of Protection

OPP: 50W
OCP:8A
OVP: 40V

Modes of Operation (Max)

Current (CC ): 8A
POWER (CP): 40V

Basic Information

Power: AC 110V/220V ±10%, 50/60Hz
Dimension: 106(W)mm x 145(H)mm x 282(D)mm
Weight: 3.4Kg

Standard Accessories

Main unit x1
DC input cable x1
AC Power cord x1
CD (User manual) x1

ETCO.VN